Oval Sided Product Labeling
The LabelOn™ configured for Flat and Oval Sided Products has superb accuracy and ease of settings. If you have Flat or Oval Sided Products needing one, two or even three labels, the LabelOn™ has the forethought of design to make the job simple to set-up again and again. The picture below hints at our thinking – which is to design for the real world not unrealistic hopes that the bristles of a fixed wipe down brush will apply even pressure on a curved surface (in this case the curve of the Product’s surface can be followed with our spring loaded brush mount). Under the picture is a Button link to our Gallery focusing on Oval Sided Label applications. Below that su_button are General LabelOn™ features and specifications. Being a LabelOn™ Modular machine, the option to add modules at the time of order or after market allows for the of Oval and Round product with very quick product change-over.
Don’t be scared by our competitor quotes for equipment that looks like ours – which is unlikely to match our performance – all our clients are delighted in the value our equipment represents.
- Fast changeovers – There are no tools required for Product Change Over. Large Hand-wheels allow for near-effortless adjustments without the need for motor assist (Motor assists adds cost/complexity and something else to service). We have elected to keep it simple with position settings choosing a little more expensive etched rulers and scales over “digital indicators” which in time can fail (again another thing to service). The Setup time between jobs is simple and quick.
- Repeatability – All Electronic settings/parameters of your production job can be saved on the touch screen allowing exact repeatability between runs.
- Flexibility – The LabelOn™ is designed in a modular format allowing for multiple configurations to suit your range of Jobs. Both the Mechanics and Electronics are Modular enabling the fast addition and removal of Mechanics AND ELECTRONICS.
- The Colour Touch Screen – has easy to use and and easy to understand su_buttons. There is also machine status information and troubleshooting menus.
- Label minimum thickness – 70micron
- Label reel core size 76mm inside diameter
- Label reel outside diameter 380mm (std)
- Label minimum size – Vertical 15mm/Horizontal 15mm
- Label web maximum height – 80/160/215/260mm (selected at the time of order)
- Label gap minimum size – 2.5mm
- Speed Synchornised to Label Feed with Digital Ratio User Setting (standard)
- Dispensing speed minimum – 5m/min (Standard)
- Dispensing speed maximum – 30m/min (Standard)
- Label accuracy ± 0.75mm – not including variations due to the Bottles or Labels
- Stepper motor drive – 5 Phase – Note older machine designs use a 2 Phase Motor that is more Coarse and Hot in operation
- Missing label detection (Standard)
- Low-level roll detection (Standard)
- Un-locked Drive Roller Assembly alarm (Standard)
- Clear label gap sensor (optional)
- Label verification (optional)
- Conveyor speed 5 – 30 m/min (Standard)
- Conveyor Height 820mm – 870 mm (Standard)
- Conveyor Length 3000 mm (Standard)
- Conveyor material – Plastic Slat/Stainless Slat/ PU Belt/Rollers
- Conveyor widths – 105/210 (Standard)
- Conveyor with Cups/Pucks (Optional)
- Conveyor Non Stalling Motor Drive with Continuous Speed Feedback (Standard)
- Wrap module (80% wrap or less)
- Round Bottle Orientation System (Up to 100% Wrap;Suits Bottles with Handles, Hand Grips or View Strips)
- Overhead conveyor – Servo Motor Driven with Multiple spring loaded backing plates
- Single & Dual Scroll / Product Positioning
- (round & oval bottles)
- Aligner-Spacer Chains
- Wind in/out and up/down Bottle Separator
- Spring Loaded wipers
- Secondary Impression rollers – Driven or Idler
- Top and bottom label placements
- Side grip twin belt transfer system
120 jobs
- Warning Beacon – Standard
- Coder – thermal or inkjet
- Eject system
- Third Label Head (Usually for neck spot labels)
- Pneumatic Product Spacing Gate (This Optimises Speed with Orientation Module Labelling)