LabelOn™ Round, Oval and Flat Label Applicator

Round, Oval and Flat – Single and Double Sided Labeling

If you have requirements of 1000 pcs a week or more, the LabelOn™ Bechtop Flat and Oval 1 or 2 labels machine will pay for itself extremely quickly. It will also make your shelf presence look like you were using accurate packaging equipment 4 or 5 times more expensive than this unit.

We can even configure this machine (at point of manufacture) so that it achieves an astonishing feat – a single full wrap of an oval product!!

Flat and Oval One or Two Sides
Labeling Machine Specifications:

Series: LabelOn™ Benchtop
Model: Flat and Oval One or Two Sides
Labelling accuracy: ±1.0mm
Typical Labelling speed: 8 to 15 Pieces / min
Product Height: 25mm to 250mm
Product Width: 25mm to 150mm
Product Thickness: 5mm to 125mm
Label Length: 12.5mm to 250mm
Label Height: 12.5mm to 150mm
Label Roll Core: ID Φ76 mm
Label Roll Diameter: OD Φ280mm
Machine Dimensions (L × W × H) 850mm×410mm×720mm
Power supply: 110/220V 50/60HZ
Total Power: 145W
Air Pressure (Mpa): 0.4 to 0.6Mpa

 

One or Two Labels onto an OVAL Bottle
Single Full Wrap Label Onto an OVAL Product

LabelOn™ Benchtop Flat and Near Flat Label Applicator

Flat and Near Flat Surface Labeling

If your labeling tasks are now reaching 500 products a week or more, then you will appreciate how much time you will save with this and how much more consistent your product can look when you apply your labels with a semi automatic process.

Suitable for projects and labeling tasks where you have in excess of 500 products a week. This is a simple, cost effective mechanism to get your processes in line with being able to supply the small, the medium, and gearing up for the big guys.

The LabelOn™ range extends beyond this semi-automated LabelOn™ Benchtop Range.

The next step from this range would be the LabelOn™ Mini where you have a small footprint inline machine with its own conveyor.  This range is small to medium volume labeling capacity.

Following the Mini Range is the LabelOn™ Basic range where you have a medium footprint, higher capacity dedicated product range capability with medium to high volume labeling capacity.

The step beyond the LabelOn™ Basic range is the LabelOn™ Modular or Contractor range. This is a full sized inline machine with unparalleled versatility and configured for the most efficient and intuitive product changes possible.

Flat and Near Flat Label Applicator
LabelOn Benchtop Flat and Near Flat Bottles
Labeling Machine Specifications:

Series: LabelOn™ Benchtop
Model: Flat and Near Flat
Labeling accuracy: ±1.0mm (±1/16th inch)
Typical Labeling speed: 8 to 30 Pieces / min
Product Height: 25mm to 190mm (1.0 inch to 7.5 inch)
Product Width: 25mm to 190mm (1.0 inch to 7.5 inch)
Product Thickness: 2.54mm to 190mm (0.1 inch to 7.5 inch)
Label Length: 12.7mm to 127mm (½ inch to 5.0 inch )
Label Height: 12.7mm to 127mm (½ inch to 5.0 inch)
Label Roll Core: ID Φ76 mm (ID Φ 3 inch)
Label Roll Diameter: OD Φ304mm (OD Φ up to 12 inch)
Machine Dimensions (L × W × H) 711mm×387mm×355mm (28 inch×15¼ inch×14 inch)
Power supply: 110/220V 50/60HZ
Total Power: 200W
Air Pressure (PSI): 40+ PSI

 

Flat Products Bags and Pouches
Flat and Near Flat Bottle Labeling

Do you have multiple short runs of variants that add up to a total too painful to label by hand?
 
The logistics of having labels pre-printed and ready to apply in this multiple SKU scenario can take a lot of time and planning.
 
The nature of small runs that can be sub 100 pieces means that creating rolls of label for automated application is not practical.
 
We have teamed up with Epson to produce a Print and apply option. Simply schedule the Jobs one after the other and “print” a blank label between jobs so the operator will know it a change of SKU. With labels going straight from Printer to Product you can now streamline when you need to have (or design) labels and automate a seemingly impossible production automation challenge.


Benchtop Round
In Action
Benchtop Flat
In Action